Ok, I know very little about cars and what I'm trying to find out is where I can find some kits to look at that will change my Acura TL 2002 fog lights into HID's that match the headlights. Can anyone help me out?|||you can get a conversion kit for your fog lights, if the fog lights are part of the headlight assembly the light bulbs are 9006 bulb, if the fog lights are separate for the head light assembly and on the bottom of the bumper it should be an H8 bulb . i recommend getting a a digital slim ballast kit for your car its easier to install.|||not sure of how, but there's bound to be a way.
the reason the fog/driving lamps aren't hid is that they have to project a different type of light beam from the headlights. this would also have added quite a bit more expense, since these are, more often than not, in harm's way.
there may be a bulb swap that gives the same look, but i haven't seen hid kits for this conversion. good luck...|||google it. I've seen on various web sites fog light conversion kits. I've also seen fog lights that weren't HID, but the covers had kind of a bluish tint to them and they resembled HIDs.
Saturday, December 24, 2011
How can I make my acura integra ls 88 faster help ?
Ok this is a nice acura model only thing is that its really weak. It has an exhaust and a cold air intake. Still feels weak. Can u help me make ir faster. Its the D engine acuras.what can I do?|||well, you can change your final drive ratio, that will modify a lot how you car accelerate without even touching the engine!
You can do other virtual mods and see how your car performs with a car performance simulator to help you decide what to do in real life!
Check it out at http://www.nxgtrsim.com|||I had one of those and rebuilt the motor at 130,000. It solved the oil burning problem and I noticed much better performance/compression off the line after all new rings and bearings. It was my first rebuild, was easier than I expected. That was one of my faster cars.|||Turbo charge it or maybe upgrade the cams|||get a swap that can handle a turbo kit, and do that!
You can do other virtual mods and see how your car performs with a car performance simulator to help you decide what to do in real life!
Check it out at http://www.nxgtrsim.com|||I had one of those and rebuilt the motor at 130,000. It solved the oil burning problem and I noticed much better performance/compression off the line after all new rings and bearings. It was my first rebuild, was easier than I expected. That was one of my faster cars.|||Turbo charge it or maybe upgrade the cams|||get a swap that can handle a turbo kit, and do that!
How to make my 2001 acura intera sound nice and loud?
Ihave a 2001 acura integra and I want to make it sound loud and really nice. I don't want that loud lawn mower sound. What would I need to make My Car sound loud and sporty? Exact parts names and brands would be a great help|||Punch a hole in the muffler.|||get a nice exhaust with a good, deep muffler. Magnaflow is a good brand. If it's still too loud or not deep enough, slap another resonator farther up under the car and that should quiet it down and give it a deep rumble.|||Flowmaster 40 series hands down. Flowmaster.com. they've got sample clips of what they sound like. 40 series is the loudest street legal one out. i used to have to on my el camino and 3 inch pipes. BAD ***!!!!!!|||intake headers and exhaust is they way to do that.
aem, dc sports, exaust varies by the exact sound you want i dont know any good exhaust's at the moment.|||Why don't you just make it fast and sporty instead of loud and wannabe-fast?
Integra? GSR? Bolt on a small turbine in it instead of making it look like its fast. But... a lot of my friends who've turboed their B18s said that it was the worst mistake ever made. You'll have to invest in your suspension too.
How about a Greddy Type-S under your hood... I think YOU would be happy with that sound lol.|||exhaust and if you want your v-tec to sound loud get loud but and sri (Sort Ram Intake) much luder when it hitts vtec that is if u swapped or have a gsr or type r|||my 2001 integra ls sounds awesome, not ricey at all:
AEM cold air intake (i would recommend the short ram intake thought)
DC 4-1 header
Apexi full exhaust
p.s. if you have a b18c motor in yours, definitely get yourself a short ram intake, when v-tec hits you'll be heard from a mile away... well at least my 00 si was like that lol
hope that helps!|||pose much?! make sure you get a huge "wing" and place on the back of it. and some plastic "rims"|||If your looking for a good exhaust system that gives a very good look and has a deep exhaust note you should look into Tanabe and Skunk2.
aem, dc sports, exaust varies by the exact sound you want i dont know any good exhaust's at the moment.|||Why don't you just make it fast and sporty instead of loud and wannabe-fast?
Integra? GSR? Bolt on a small turbine in it instead of making it look like its fast. But... a lot of my friends who've turboed their B18s said that it was the worst mistake ever made. You'll have to invest in your suspension too.
How about a Greddy Type-S under your hood... I think YOU would be happy with that sound lol.|||exhaust and if you want your v-tec to sound loud get loud but and sri (Sort Ram Intake) much luder when it hitts vtec that is if u swapped or have a gsr or type r|||my 2001 integra ls sounds awesome, not ricey at all:
AEM cold air intake (i would recommend the short ram intake thought)
DC 4-1 header
Apexi full exhaust
p.s. if you have a b18c motor in yours, definitely get yourself a short ram intake, when v-tec hits you'll be heard from a mile away... well at least my 00 si was like that lol
hope that helps!|||pose much?! make sure you get a huge "wing" and place on the back of it. and some plastic "rims"|||If your looking for a good exhaust system that gives a very good look and has a deep exhaust note you should look into Tanabe and Skunk2.
How to unlock 95 Acura Legend stereo with code?
I have the 5 digit unlock code for my acura legend but im not exactly sure how to enter it in right. I've been trying to enter it using the keypad on the radio but that doesn't work. Anyone that knows the right way to enter it PLEASE let me know. Thanks|||turn on the radio... then press the code in!
and thats it!
unless you have the wrong code!|||start up the car, then turn on the radio and put in the code.
and thats it!
unless you have the wrong code!|||start up the car, then turn on the radio and put in the code.
How much does it cost for new breaks on an Acura TL 2005 at Midas?
How much does it cost for new breaks on an Acura TL 2005? I want to put new breaks at Midas. And is Midas good?|||You should call Midas for price, and yes, when it comes to brakes, Midas is good...at least they stand behind their work.
Good luck|||No, Midas is not good. You'll pay around $70 for 'lifetime' brakes. These are cheapo pads that you can get for $15 at a parts store. But they'll replace them for free when they wear out. But - you have to pay the labor. So you get another cheap crappy low performance set of pads, and pay a guy to put them on again.
You'd need to put at least 150,000 more miles on the car for that to work out and break even on the extra cost of the pads.
The TL isn't a cheap piece of crap, however, so why would you put cheap crap pads on it?
If you know your stuff, find a mechanic that will talk to you and assure you he'll use quality parts. A shop that displays a CarQuest logo is a good place to start; CQ carries good brake parts. If you don't know cars, go to the dealer. You'll pay more, but you'll get the job done right with the right parts. Or find an Accura or car enthusiast forum and see if anyone has a local recommendation for a shop.
Or - find a shop that will take outside parts, do a little research on good brake parts (Hint - Baer, Brebmo, PBR, Hawk, EBC [EBC Green only for a street car] and others), get good parts and bring them in. Make sure they drive the car after the brakes are installed. There's a procedure to 'bed in' pads, and you want them to find any squeaks and squeals and fix them.
Or, do it yourself. It's easy. Post another question if you don't know how to do brakes (I can do a brake job on my car in 25 minutes - including jacking it up, supporting it on stands, taking the wheels off, doing the work, tightening it all back up and getting it back down on the ground. Trust me - brakes are EASY).|||BRAKES. Figure 200-250 per axle for pads and rotors.
Good luck|||No, Midas is not good. You'll pay around $70 for 'lifetime' brakes. These are cheapo pads that you can get for $15 at a parts store. But they'll replace them for free when they wear out. But - you have to pay the labor. So you get another cheap crappy low performance set of pads, and pay a guy to put them on again.
You'd need to put at least 150,000 more miles on the car for that to work out and break even on the extra cost of the pads.
The TL isn't a cheap piece of crap, however, so why would you put cheap crap pads on it?
If you know your stuff, find a mechanic that will talk to you and assure you he'll use quality parts. A shop that displays a CarQuest logo is a good place to start; CQ carries good brake parts. If you don't know cars, go to the dealer. You'll pay more, but you'll get the job done right with the right parts. Or find an Accura or car enthusiast forum and see if anyone has a local recommendation for a shop.
Or - find a shop that will take outside parts, do a little research on good brake parts (Hint - Baer, Brebmo, PBR, Hawk, EBC [EBC Green only for a street car] and others), get good parts and bring them in. Make sure they drive the car after the brakes are installed. There's a procedure to 'bed in' pads, and you want them to find any squeaks and squeals and fix them.
Or, do it yourself. It's easy. Post another question if you don't know how to do brakes (I can do a brake job on my car in 25 minutes - including jacking it up, supporting it on stands, taking the wheels off, doing the work, tightening it all back up and getting it back down on the ground. Trust me - brakes are EASY).|||BRAKES. Figure 200-250 per axle for pads and rotors.
What year does the acura integra start having the round head lights?
iam gonna buy an acura integra and iam interested in one thats a 95 but i didnt see the pics,does it have round headlights?|||to answer your question,
they started doing the round headlights in 1994.
they did this for 1994-2001 integra's.
but i would go with the 98-01 integra's cleaner look
read here and you can see why:
http://www.team-integra.net/sections/art鈥?/a>|||1994 - 2001 have round headlights|||1994-2001 have the rounded head lights.
they started doing the round headlights in 1994.
they did this for 1994-2001 integra's.
but i would go with the 98-01 integra's cleaner look
read here and you can see why:
http://www.team-integra.net/sections/art鈥?/a>|||1994 - 2001 have round headlights|||1994-2001 have the rounded head lights.
Where can i find a plastic cover for the passengers side tail light of a 2005 Acura MDX?
Someone smashed into my car while it was parked on the street and broke the plastic cover of my passenger side tail light on a recently purchased 2005 Acura MDX. All i can find is the entire light replacement (around $150)-- is there somewhere I can find just the plastic cover?|||bone yard
Subscribe to:
Posts (Atom)